Cisco SPS2024 Reference Manual page 445

System Management Commands
telnet
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Console> 'Ctrl-shift-6' ?
[Special telnet escape help]
^^ B sends telnet BREAK
^^ C sends telnet IP
^^ H sends telnet EC
^^ O sends telnet AO
^^ T sends telnet AYT
^^ U sends telnet EL
Ctrl-shift-6 x suspends the session (return to system command
prompt)
Several concurrent Telnet sessions can be opened and switched. To open a
subsequent session, the current connection has to be suspended by pressing the
escape sequence keys (Ctrl-Shift-6) and x to return to the system command
prompt. Then open a new connection with the telnet User EXEC mode command.
Keywords Table
Options
/echo
/quiet
/source-interface
/stream
Ctrl-Shift-6 x
Description
Enables local echo.
Prevents onscreen display of all messages from
the software.
Specifies the source interface.
Turns on stream processing, which enables a raw
TCP stream with no Telnet control sequences. A
stream connection does not process Telnet
options and can be appropriate for connections to
ports running UNIX-to-UNIX Copy Program
(UUCP) and other non-Telnet protocols.
Return to System Command Prompt
31
443