Logging Console - Cisco SPS2024 Reference Manual

Syslog Commands

logging console

logging console
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The default facility is local7.
Command Mode
Global Configuration mode
User Guidelines
Up to 8 syslog servers can be used.
If no specific severity level is specified, the global values apply to each server.
Example
The following example limits logged messages sent to the syslog server with IP
address 10. 1 . 1 . 1 to severity level critical.
Console(config)# logging 10.1.1.1 severity critical
The logging console Global Configuration mode command limits messages
logged to the console based on severity. Use the no form of this command to
disable logging to the console.
Syntax
level
logging console
no logging console
Parameters
•
level — Specifies the severity level of logged messages displayed on the
console. The possible values are: emergencies, alerts, critical, errors,
warnings, notifications, informational, debugging.
30
422