Ip Arp Inspection Vlan - Cisco SPS2024 Reference Manual

ARP Inspection Commands

ip arp inspection vlan

ip arp inspection vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip arp inspection vlan Global Configuration mode command enables ARP
inspection based on DHCP snooping database on a VLAN. To disable ARP
inspection on a VLAN, use the no form of this command.
Syntax
vlan-id
ip arp inspection
vlan-id
no ip arp inspection
Parameters
•
vlan-id
— Specifies a VLAN ID.
Default Configuration
The default configuration is set to disabled.
Command Mode
Global Configuration mode
User Guidelines
This command enables ARP inspection on a VLAN based on the DHCP snooping
database. The ip arp inspection list assign Global Configuration mode command
enables static ARP inspection.
Example
The following example enables ARP inspection on a VLAN based on the DHCP
snooping database.
Console(config)# ip arp inspection vlan
4
65