Show Dot1X Statistics - Cisco SPS2024 Reference Manual

802.1x Commands

show dot1x statistics

show dot1x statistics
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example displays 802. 1 x users.
console(config-if)# show dot1x users
Port Username
------ ----------- ---------- ------
e1 dva5
e2 admin
The following table describes the significant fields shown in the display.
Field
Port
Username
Session Time
MAC address
Authentication
Method
The show dot1x statistics Privileged EXEC mode command displays 802. 1 x
statistics for the specified interface.
Syntax
show dot1x statistics ethernet
Session Auth
Time Method
00:00:06 Remote
00:04:04 Remote
Description
The port number.
The username representing the identity of the
Supplicant. This field shows the username in case
the port control is auto. If the port is Authorized, it
shows the username of the current user. If the port
is unauthorized it shows the last user
authenticated successfully.
The amount of time the user is logged in.
The supplicant MAC address.
The authentication method used to establish the
session.
interface
MAC
Address
--------------
00:05:74:94:2a:1c 5
00:05:1c:18:0a:7e
36
VLAN
----
532