Debug-Mode - Cisco SPS2024 Reference Manual

User Interface Commands

debug-mode

debug-mode
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
This example dumps all output immediately after entering a show command.
Console> terminal datadump
The debug-mode Privileged EXEC mode command switches to debug mode.
Syntax
debug-mode
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables the debug command interface.
console(config)#
console# debug
>debug
Enter DEBUG Password: *****
DEBUG>
33
473