Command Modes - Cisco SPS2024 Reference Manual

Spanning Tree Commands
spanning-tree mst cost
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
instance-ID—
ID of the spanning-tree instance (Range: 1-7).
•
cost—
The port path cost. (Range: 1-200,000,000)
Default Configuration
Default path cost is determined by port speed and path cost method (long or
short) as shown below:
Interface
Port-channel
Gigabit Ethernet (1000 Mbps)
Fast Ethernet (100 Mbps)
Ethernet (10 Mbps)

Command Modes

Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the MSTP instance 1 path cost for Ethernet port
e9 to 4.
Console(config) # interface ethernet e9
Console(config-if) # spanning-tree mst 1 cost 4
Long Short
20,000 4
20,000 4
200,000 19
2,000,000 100
28
384