Aaa Authentication Enable - Cisco SPS2024 Reference Manual

AAA Commands

aaa authentication enable

aaa authentication enable
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The aaa authentication enable Global Configuration mode command defines
authentication method lists for accessing higher privilege levels. To restore
defaults, use the no form of this command.
Syntax
aaa authentication enable {default |
no aaa authentication enable default
Parameters
•
default — Uses the listed authentication methods that follow this argument
as the default list of methods, when using higher privilege levels.
•
list-name
— Character string used to name the list of authentication
methods activated, when using access higher privilege levels. (Range: 1-12
characters)
•
method1 method2...
[
Keyword
enable
line
none
radius
tacacs
Default Configuration
If the default list is not set, only the enable password is checked. This has the
same effect as the command aaa authentication enable default enable.
list-name
] — Specify at least one method from the following list:
Description
Uses the enable password for authentication.
Uses the line password for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for
authentication.
Uses the list of all TACACS+ servers for
authentication.
method1 method2...
} [
2
]
35