Dot1X Guest-Vlan Enable - Cisco SPS2024 Reference Manual

802.1x Commands

dot1x guest-vlan enable

dot1x guest-vlan enable
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Console# configure
Console(config)# vlan database
Console(config-vlan)# vlan 2
Console(config-vlan)# exit
Console(config)# nterface vlan 2
Console(config-if)# dot1x guest-vlan
The dot1x vlans guest-vlan enable Interface Configuration mode command
enables unauthorized users on the interface access to the Guest VLAN. Use the no
form of this command to disable access.
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Default Configuration
Disabled.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
A device can have only one global guest VLAN. The guest VLAN is defined using
the dot1x guest-vlan Interface Configuration mode command.
Example
The following example enables unauthorized users on Ethernet port e1 to access
the guest VLAN.
36
543