Chapter 22: Port Monitor Commands; Port Monitor - Cisco SPS2024 Reference Manual

Port Monitor Commands

port monitor

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The port monitor Interface Configuration mode command starts a port monitoring
session. Use the no form of this command to stop a port monitoring session.
Syntax
src-interface
port monitor
src-interface
no port monitor
Parameters
•
src-interface
— Valid Ethernet port.
•
rx — Monitors received packets only.
•
tx — Monitors transmitted packets only.
Default Configuration
Monitors both received and transmitted packets.
Command Mode
Interface Configuration (Ethernet) mode
[rx | tx]
22
265