Siemens CU240B-2 Parameter Manual page 452

Parameters
List of Parameters
p20324[0...1] BI: RSR 2 inputs / RSR 2 inputs
Access level: 3
Can be changed: T
Units group: -
Min
-
Description: Sets the signal source for set input S and reset input R of instance RSR 2 of the RS flipflop.
Index: [0] = Set S
[1] = Reset R
r20325 BO: RSR 2 output Q / RSR 2 output Q
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for output Q of instance RSR 2 of the RS flipflop
r20326 BO: RSR 2 inverted output QN / RSR 2 inv outp QN
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for inverted output QN of instance RSR 2 of the RS flipflop.
p20327 RSR 2 run-time group / RSR 2 RTG
Access level: 3
Can be changed: T
Units group: -
Min
1
Description: Setting parameter for the run-time group in which instance RSR 2 of the RS flipflop is to be called.
Value: 1:
2:
3:
4:
5:
6:
9999: Do not calculate
p20328 RSR 2 run sequence / RSR 2 RunSeq
Access level: 3
Can be changed: T
Units group: -
Min
0
Description: Setting parameter for the run sequence of instance RSR 2 within the run-time group set in p20327.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
1-452
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
7999
Data type: U32 / Binary
Data set: -
Factory setting
0
Data type: Unsigned32
Data set: -
Factory setting
-
Data type: Unsigned32
Data set: -
Factory setting
-
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
850
© Siemens AG 2011 All Rights Reserved