Siemens CU240B-2 Parameter Manual page 27

r0039 Energy consumption / Energy consumption
Access level: 2
Can be changed: -
Units group: -
Min
- [kWh]
Description: Displays the electrical energy used since the last reset.
Dependency: Refer to: p0040
p0040 Reset energy consumption display / Energy usage reset
Access level: 3
Can be changed: U, T
Units group: -
Min
0
Description: Setting to reset the energy consumption display (r0039).
Procedure:
Set p0040 = 0 --> 1
The display is reset and the parameter is automatically set to zero.
Dependency: Refer to: r0039
r0041 Energy usage saved / Energy usage saved
Access level: 2
Can be changed: -
Units group: -
Min
- [kWh]
Description: Displays the saved energy referred to 100 operating hours.
Dependency: Refer to: p0040
p0045 Smoothing time constant, display values / T_smth display
Access level: 3
Can be changed: U, T
Units group: -
Min
0.00 [ms]
Description: Sets the smoothing time constant for the following display values:
r0063[1], r0068[1], r0080[1], r0082[1].
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Calculated: -
Scaling: -
Unit selection: -
Max
- [kWh]
Calculated: -
Scaling: -
Unit selection: -
Max
1
Calculated: -
Scaling: -
Unit selection: -
Max
- [kWh]
Calculated: -
Scaling: -
Unit selection: -
Max
1000.00 [ms]
Parameters
List of Parameters
Data type: FloatingPoint32
Data set: -
Factory setting
- [kWh]
Data type: Unsigned8
Data set: -
Factory setting
0
Data type: FloatingPoint32
Data set: -
Factory setting
- [kWh]
Data type: FloatingPoint32
Data set: -
Factory setting
4.00 [ms]
1-27