Siemens CU240B-2 Parameter Manual page 446

Parameters
List of Parameters
p20283 LVM 1 run sequence / LVM 1 RunSeq
Access level: 3
Can be changed: T
Units group: -
Min
0
Description: Setting parameter for the run sequence of instance LVM within the run-time group set in p20282.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20284 CI: DIF 0 input X / DIF 0 input X
Access level: 3
Can be changed: T
Units group: -
Min
-
Description: Sets the signal source of input quantity X of instance DIF 0 of the differentiating element.
p20285 DIF 0 differentiating time constant in ms / DIF 0 T_diff ms
Access level: 3
Can be changed: T
Units group: -
Min
0.00
Description: Sets the differentiating time constant Td in milliseconds of instance DIF 0 of the differentiating element.
r20286 CO: DIF 0 output Y / DIF 0 output Y
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for output quantity Y of instance DIF 0 of the differentiating element.
p20287 DIF 0 run-time group / DIF 0 RTG
Access level: 3
Can be changed: T
Units group: -
Min
5
Description: Setting parameter for the run-time group in which instance DIF 0 of the differentiating element is to be called.
Value: 5:
6:
9999: Do not calculate
1-446
Run-time group 5
Run-time group 6
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Calculated: -
Scaling: -
Unit selection: -
Max
7999
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
340.28235E36
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Data type: Unsigned16
Data set: -
Factory setting
730
Data type: U32 / FloatingPoint32
Data set: -
Factory setting
0
Data type: FloatingPoint32
Data set: -
Factory setting
0.00
Data type: FloatingPoint32
Data set: -
Factory setting
-
Data type: Integer16
Data set: -
Factory setting
9999
© Siemens AG 2011 All Rights Reserved