Siemens CU240B-2 Parameter Manual page 14

Parameters
Introduction to Parameters
Table 1-4
Unit group
7_1
7_2
14_5
14_10
21_1
21_2
39_1
Table 1-5
Unit group
9_1
Description
Explanation of the parameter function.
Values
List of possible parameter values.
Recommendation
Information about recommended settings.
Index
The name and meaning of each individual index is specified for indexed para-
meters, except indexed parameters which belong to a data set (see "Data Set").
Bit array
For parameters with bit arrays, for each bit the following information is provided:
 Bit number and signal name
 Meaning at signal states 0 and 1
 Function diagram (FP) (optional). The signal is shown on this function dia-
gram.
Dependency
Conditions which need to be fulfilled with regard to this parameter. Also includes
special effects which can occur between this parameter and others.
1-14
Unit group (p0505), continued
Unit selection for p0505 =
1 2
Nm %
Nm Nm
kW %
kW kW
°C °C
K K
2
1/s %
Unit group (p0595)
Unit selection for p0595 =
Value
The values that can be set and the technological units are shown in
p0595 (see Chapter 1.2).
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
3 4
lbf ft % p2003
lbf ft lbf ft -
HP % r2004
HP HP -
°F °F -
°F °F -
2
1/s % p2007
Unit
© Siemens AG 2011 All Rights Reserved
Reference value
at %
Reference value
at %