Siemens CU240B-2 Parameter Manual page 41

r0082[0...2] CO: Active power actual value / P_act
Access level: 4
Can be changed: -
Units group: 14_5
Min
- [kW]
Description: Displays the instantaneous active power.
Index: [0] = Unsmoothed
[1] = Smoothed with p0045
[2] = Electric power
Dependency: Refer to: r0032
Note: The mechanical active power is available smoothed (r0032 with 100 ms, r0082[1] with p0045) and unsmoothed
(r0082[0]).
r0083 CO: Flux setpoint / Flex setp
Access level: 4
Can be changed: -
Units group: -
Min
- [%]
Description: Displays the flux setpoint.
r0084[0...1] CO: Flux actual value / Flux act val
Access level: 4
Can be changed: -
Units group: -
Min
- [%]
Description: Displays the flux actual value.
Index: [0] = Unsmoothed
[1] = Smoothed
r0087 CO: Actual power factor / Cos phi act
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Displays the actual active power factor.
r0089[0...2] Actual phase voltage / U_phase act val
Access level: 4
Can be changed: -
Units group: 5_3
Min
- [V]
Description: Displays the actual phase voltage.
Index: [0] = Phase U
[1] = Phase V
[2] = Phase W
Note: The values are determined from the transistor power-on duration.
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Calculated: -
Scaling: r2004
Unit selection: p0505
Max
- [kW]
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
- [%]
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
- [%]
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: p2001
Unit selection: p0505
Max
- [V]
Parameters
List of Parameters
Data type: FloatingPoint32
Data set: -
Factory setting
- [kW]
Data type: FloatingPoint32
Data set: -
Factory setting
- [%]
Data type: FloatingPoint32
Data set: -
Factory setting
- [%]
Data type: FloatingPoint32
Data set: -
Factory setting
-
Data type: FloatingPoint32
Data set: -
Factory setting
- [V]
1-41