Siemens CU240B-2 Parameter Manual page 410

Parameters
List of Parameters
r20099 CO: ADD 1 output Y / ADD 1 output Y
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for the output quantity Y = X0 + X1 + X2 + X3 of instance ADD 1 of the adder.
p20100 ADD 1 run-time group / ADD 1 RTG
Access level: 3
Can be changed: T
Units group: -
Min
5
Description: Setting parameter for the run-time group in which the instance ADD 1 of the adder is to be called.
Value: 5:
6:
9999: Do not calculate
p20101 ADD 1 run sequence / ADD 1 RunSeq
Access level: 3
Can be changed: T
Units group: -
Min
0
Description: Setting parameter for the run sequence of instance ADD 1 within the run-time group set in p20100.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20102[0...1] CI: SUB 0 inputs / SUB 0 inputs
Access level: 3
Can be changed: T
Units group: -
Min
-
Description: Sets the signal source of minuend X1 and subtrahend X2 of instance SUB 0 of the subtractor.
Index: [0] = Minuend X1
[1] = Subtrahend X2
r20103 CO: SUB 0 difference Y / SUB 0 difference Y
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for the difference Y = X1 - X2 of instance SUB 0 of the subtractor.
1-410
Run-time group 5
Run-time group 6
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Data type: FloatingPoint32
Data set: -
Factory setting
-
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
220
Data type: U32 / FloatingPoint32
Data set: -
Factory setting
0
Data type: FloatingPoint32
Data set: -
Factory setting
-
© Siemens AG 2011 All Rights Reserved