Keyer Selection; Type; Clip, Gain, Opacity - Barco FSN Series User Manual

hÉóÉê=cìåÅíáçåë=~åÇ=jçÇáÑáÉêë
In the Keyer Menu , the buttons on the Tool Bar and in the Palette allow you to modify the
selected keyer in a variety of creative ways. The following modifiers are discussed:
•
•
•
•
•
•
•
hÉóÉê=pÉäÉÅíáçå
The {Keyer} button is a "location" button that enables you to select and modify keys on any
switcher bank, without leaving the menu. Refer to the "
page 125 for additional details on location buttons. Press {Keyer} to display the Keyer
Selection Pop-up , which lists all available keyers on the panel.
M/E 1
Key 1
M/E 1
Key 2
DSK
Keyer
M1 K1
Figure 5-40. Keyer selection pop-up
When you select another keyer, the following actions occur:
•
•
•
FSN Series • User's Guide

Keyer Selection

Type

Clip, Gain, Opacity

Key Fill
Swap Key Settings
External Key
Copy Key Settings
The pop-up clears.
The name and location of the new keyer appear on the button label and in the
Title Bar . Note that the yellow button label is abbreviated, e.g., M/E 1 , Key 2
appears as M1 K2 on the button.
All selections and functions for the new keyer appear on the Keyer Menu .
5. Menu Orientation
Keyer Menu
Location Buttons " section on
145