Barco FSN Series User Manual page 207

fåéìí=pÉíìé=jÉåì=qççä=_~ê=cìåÅíáçåë
For both native and universal inputs, the following functions are provided in the Tool Bar :
•
Save
Settings
•
Restore
Saved
Settings
•
Restore
Default
Settings
fåéìí=pÉíìé=kçíÉë
Please note the following important points regarding input setup:
•
FSN Series • User's Guide
Press {Save Settings} to save the selected input's setup parameters in non-
volatile memory.
Press {Restore Saved Settings} to recall the selected input's setup parameters
from non-volatile memory. This function effectively allows you to return to the
saved settings, after making temporary adjustments.
Press {Restore Default Settings} to recall the selected input's default setup
parameters back into the input's "temporary" settings. This function does not
over-write the "saved" settings.
Because you can install and set up either a NIC or a UIC in input slots 3 and 4 ,
many creative input combinations are possible. However, if you move or change
input card assignments in these two slots during the setup procedure, the setup is
invalidated, and must be repeated once the final card configuration is reached.
5. Menu Orientation
System Menu
207