Barco FSN Series User Manual page 186

5. Menu Orientation
System Menu
•
Please note the following important points regarding the mapping of the ASSIGN button:
•
•
186
Press {PGM Clean} to select the clean feed point prior to the DSK.
Note The M/E 2 clean feed connection points are not available in
release 1.0.
The clean feed selection is global for all Aux outputs. If you change the mapping
for one output, it changes for all outputs. For example:
On the Aux Output Row , select Aux 1 .
On the Aux Source Row , select ASSIGN .
On the Clean Feed Setup Menu , press {Assign Button} and select
{M/E 1 Clean 1} .
Now, select Aux 2 , ASSIGN , and on the Clean Feed Setup Menu ,
select {PGM Clean} . The output on Aux 1 also changes to {PGM
Clean} .
To quickly display the Assign Button Panel on the Clean Feed Setup Menu ,
press and hold the ASSIGN button.
FSN Series • User's Guide