Table of Contents
Advertisement
`~êÇ=fåëÉêíáçå
To insert a card:
1.
2.
3.
4.
Card
Figure 4-11. Ejector Orientation prior to card insertion
FSN Series • User's Guide
Use
Table 4-4
on page 103 to verify the slots in which the card can be installed.
Once verified, open the chassis front door and remove it (if desired). In
Chapter 2, refer to the
"Chassis Front
Orient the card so that the label (e.g., UIC or NIC) is at the top. Ensure that both
ejectors are unlatched from the slots in the card's front plate.
Once unlatched, hold the top ejector up, as shown below. The bottom ejector will
automatically fall away from the front of the card.
Door" section on page 31 for details.
Hold up
top Ejector
Bottom Ejector
4. Installation
Card and I/O Installation
105
Advertisement
Table of Contents
