Barco FSN Series User Manual page 192

5. Menu Orientation
System Menu
•
Error
Reporting
On
•
Refresh
All
Sync
Caution
Refresh the input sync mode for all native inputs set to Auto
mode?
Note: Only native inputs set to Auto mode will be affected.
Figure 5-85. Refresh Sync Pop-up
•
Setup
192
~
Frame — freezes an entire frame. Note that with this selection, interfield
motion may be present in the frozen image.
Note The {Freeze Mode} button does not appear when a
progressive native resolution is set, nor does it appear when
a universal input is selected.
Use the {Error Reporting} button to toggle error reporting on or off on a
connector by connector basis.
~
When on , if an input experiences an error, the associated BNC turns red
on the rear I/O view. In addition, the input's Programmable Display
turns red, and the " Error " button appears.
~
When off , the input's Programmable Display remains green, the red
" Error " button does not appear, and the error message is removed from
the list in the View Errors Menu . In this mode, however, the connector
remains red.
Note You can also use this button to turn error reporting off, after
an error has occurred and you have acknowledged it.
In Chapter 7, refer to the "
for more information.
Press {Refresh All Sync} to display the Refresh Sync Pop-up , which can be
used to refresh the input sync processing for all native inputs.
Refresh All Native Input Sync
Yes
~
Press {Yes} to refresh the sync processing for all native inputs whose
sync mode is set to Auto (on the Input Setup Menu ). Native inputs that
are set to Frame Sync or Minimum Delay modes will not be affected.
~
Press {No} to cancel the procedure safely.
Press {Setup} to display the Input Setup Menu for the selected input. Note that
the display is different, depending if a native input is selected on a NIC , or a
universal input is selected on a UIC .
~
Refer to the " Input Setup Menu for Native Inputs
the menu functions for native inputs.
Understanding Error Messages
No
" section on page 271
" section for details on
FSN Series • User's Guide