Barco FSN Series User Manual page 124

5. Menu Orientation
Buttons, Tables and Matrices
•
Function
Function Off
Figure 5-12. Conditional button states
s~äìÉ=_ìííçåë
The figure below illustrates a Value button.
Knob
Function
Value
Figure 5-13. Value button
When certain functions are enabled in a menu, value buttons appear adjacent to the four
knobs on the right side of the Touch Screen . These buttons enable you to enter values for
the selected parameter. The parameter's current value appears within the dark blue insert.
There are three ways to adjust the value:
•
•
•
qçÖÖäÉ=_ìííçåë
The figure below illustrates both states of a Toggle button.
Function
State 1
Figure 5-14. Toggle button states
Toggle buttons are two-state "function" buttons with a cyan colored insert, and the current
state appears within the insert (e.g., On or Off ). Pressing the button changes the state of
the selected function.
124
Conditional
The figure below illustrates both states of a Conditional function button.
Conditional
Function
Function
Function On
Conditional buttons appear when certain conditional functions are required. They
can be either momentary or latching, depending on the required function.
Rotate the knob clockwise to increment the value.
Rotate the knob counter-clockwise to decrement the value.
Press the value button itself. When pressed, the button latches, and the Keypad
appears. Refer to the " Using the Keypad
Function
State 2
" section on page 130 for details.
FSN Series • User's Guide