Barco FSN Series User Manual page 179

The following functions are provided in the Tool Bar :
•
Reference
Input
External
FSN Series • User's Guide
~
If External is selected with the {Reference Input} button, one of three
different labels will be shown.
• External, Locked @ [rate] — if reference video is detected
and locked.
Note If the reference is locked but the rate is incorrect (for the
selected native format), the entire field will be red. In
Appendix A, refer to the "
Specifications
information about valid video reference frame rates.
• External, Missing — if reference video is missing. In this case,
the field will be red.
• External, Not Locked — if a signal is detected but not locked.
In this case, the field will be red.
Press {Reference Input} to display a pop-up which offers two reference options:
~
Free Run — selects the FSN-1400's internal sync generator as the
reference source.
Note If Free Run is selected, the external Cut and Fill DSK inputs
can not be used. In this condition, the {External Key} button
on the Keyer Menu for the DSK will be grayed out.
~
External — selects the REF IN connector on the System Card . One of
three external signals can be connected: SMPTE bi-level sync , tri-
level sync or black burst .
Note If External is selected, ensure that the proper signal is
connected to the REF IN connector on the System Card . In
Appendix A, refer to the "
Specifications
about the allowed frame rates for the reference input.
5. Menu Orientation
Reference Video Input
" section on page 309 for additional
Reference Video Input
" section on page 309 for detailed information
System Menu
179