Barco FSN Series User Manual page 53

4)
Table 2-6. UOC connector combinations for selected universal output formats
HD-SDI
SD-SDI
DVI *
CVBS
Y/C
YPbPr **
RGsB
RGBS
RGBHV ***
5)
FSN Series • User's Guide
Universal Output 1
Three connectors are provided for Universal Output 1 (1 x HD15, 1 x DVI-I, 1 x
BNC). Using these connectors, different combinations of outputs can be
connected to the FSN-1400, as outlined below.
Note Multiple outputs on a single UOC channel can be active at the
same time, provided that the selected format is compatible.
For example, 1920 x 1080i @ 59.94 is a compatible format on
all three output connectors.
Cells with check marks denote the connections required for the indicated format.
Format BNC
* up to 165 MHz
** NTSC, PAL or HD
*** up to 165 MHz (UXGA)
Please note the following important point regarding the UOC:
~
Using the Aux Output Setup Menu, the BNC connectors on the UOC
can be configured as additional native outputs. In this mode, scaling is
not possible.
Refer to the "Analog Format Connection
additional information on using the HD-15 connector.
Universal Output 2
Output connections for Universal Output 2 are identical to Universal Output 1.
Refer to the explanation of Universal Output 1 for details.
2. FSN-1400 Orientation
Card Descriptions
Connectors
DVI-I HD-15
Table" section on page 56 for
53