Barco FSN Series User Manual page 76

3. Control Panel Orientation
Control Panel Descriptions
WIPE
FX
TRIG
5)
CUT
6)
AUTO
TRAN
76
~
Press WIPE to arm the M/E for a wipe transition, using the layers
enabled in the Next Transition Group. The wipe can be performed
manually with the T-Bar, or automatically using AUTO TRAN.
Transition combinations are:
• WIPE + BG: Background wipe
• WIPE + KEY 1: Wipe Key 1, on or off
• WIPE + KEY 2: Wipe Key 2, on or off
• WIPE + KEY 1 + KEY 2: Wipe Key 1 and Key 2, on or off
• WIPE + BG + KEY 1: Wipe background and Key 1
• WIPE + BG + KEY 2: Wipe background and Key 2
• WIPE + BG + KEY 1 + KEY 2: Wipe BG, Key 1 and Key 2
Note Press and hold WIPE to display the Wipe Menu, which
enables you to choose wipe patterns and adjust parameters.
In Chapter 5, refer to the
for details.
~
The FX TRIG button is not available in release 1.0.
Cut
Press CUT to instantly cut to the M/E layers that are enabled in the Next
Transition Section. For example:
BG enabled — press CUT to cut from BG to PST.
KEY 1 enabled — press CUT to cut Key 1 on or off.
BG + KEY 2 enabled — press CUT to cut from BG to PST, and
simultaneously cut Key 2 on or off.
Auto Transition
Press AUTO TRAN to trigger an automatic transition to or from the layers enabled
in the Next Transition Group. The transition uses the "type" of transition enabled
in the Effects Group, and the M/E's current transition rate. For example:
BG + MIX enabled — press AUTO TRAN to mix from BG to PST.
BG + WIPE enabled — press AUTO TRAN to wipe from BG to PST.
KEY 1 + MIX enabled — press AUTO TRAN to mix Key 1 on or off.
BG + KEY 2 + MIX enabled — press AUTO TRAN to mix from BG
to PST, and simultaneously mix Key 2 on or off.
KEY 1 + KEY 2 + WIPE enabled — press AUTO TRAN to wipe Key
1 and Key 2 on or off.
Press AUTO TRAN during the transition interval to pause the transition. The
Transition LEDS indicate the point at which the transition is paused. Press
AUTO TRAN again to continue in the same direction. You can pause and
continue repeatedly.
Note Use the Transition Menu to change transition rates and to
select transition curves. Remember that the M/E's transition
rate appears in the Transition Display. In Chapter 5, refer to
the "Transition
"Wipe Menu" section on page 137
Menu" section on page 134 for details.
FSN Series • User's Guide