M/E 1 Enables; Pgm Enables - Barco FSN Series User Manual

bå~ÄäÉ=aÉëÅêáéíáçåë
This section provides descriptions of each module's Enables. The following topics are
discussed:
•
•
•
•
jLb=N=bå~ÄäÉë
The figure below illustrates the available Enables when the M/E 1 module is selected:
Figure 5-59. M/E 1 Enables
Following are descriptions of each M/E 1 Enable. Remember that each can be toggled on
or off without restriction:
•
•
•
•
•
BG
MIX
Figure 5-60. Effects Enables, M/E 1
•
•
FSN Series • User's Guide

M/E 1 Enables

PGM Enables

System Enables
Aux Enables
{BG Bus} — stores or recalls the source selected on the M/E's BG bus.
Note The {BG Bus} button does not store or recall input settings.
It only stores or recalls the source. Use " System " enables to
store and recall input settings.
{PST Bus} — stores or recalls the source selected on the M/E's PST bus.
{Key 1} — stores or recalls all settings for Keyer 1, plus the selected key source.
{Key 2} — stores or recalls all settings for Keyer 2, plus the selected key source.
{Effects} — stores or recalls the selections in the M/E's Effects Group and Next
Transition Group .
KEY KEY
1 2
FX
WIPE
TRIG
{Rate} — stores or recalls the M/E's transition rate.
{T-Bar} — stores or recalls the position of the T-Bar.
Note There is no separate "enable" button for color background
settings. Each time you store the contents of the M/E, color
background settings are automatically stored.
5. Menu Orientation
Memory Menu
163