Chassis Overview; Card Slot Allocation And I/O Flexibility; Chassis Front; Chassis Rear - Barco FSN Series User Manual

2. FSN-1400 Orientation
Hardware Description
e~êÇï~êÉ=aÉëÅêáéíáçå
The following topics are discussed in this section:
•
•
•
•
•
`Ü~ëëáë=lîÉêîáÉï
The FSN Series chassis (FSN-1400) permits a high degree of flexibility in terms of the
number of inputs and outputs that you can configure. Please note:
•
•
•
•
•
•
28

Chassis Overview

Card Slot Allocation and I/O Flexibility

Chassis Front Door

Chassis Front

Chassis Rear

All cards are modular and hot-swappable.
The 6RU chassis supports:
~
14 front cards, including required and optional cards.
~
14 rear slots, the configuration of which depends on the type (and
number) of populated front cards.
An internal "midplane" architecture allows cards to be plugged in from both the
front and rear of the chassis.
There are no active components on the midplane or on the plug-in rear I/O cards.
The front door provides a seal for air flow and chassis cooling. There are no
controls on the door, but two status LEDs are provided. Refer to the
Front Door" section on page 31 for details.
The following additional features are provided:
~
Optional dual redundant hot-swappable power supplies.
~
One tally connector (24 contact closures).
~
One GPIO connector, with four input (GPI) and eight output (GPO) ports.
~
Two serial ports.
"Chassis
FSN Series • User's Guide