Barco FSN Series User Manual page 180

5. Menu Orientation
System Menu
•
Output
Format
Select the desired output
720 x 487i @ 59.94
720 x 576i @ 50
1920 x 1080i @ 59.94
1920 x 1080i @ 50
1280 x 720p @ 59.94
1280 x 720p @ 50
Figure 5-75. Output Format Keypad
•
Output
V-Lock
On
180
Press {Output Format} to display the Output Format Keypad , which lists all
available output resolutions.
format from the list
Each entry is listed using the following convention: Format @ Fv (Hz) . Select the
desired format and press {Apply} to set the system's native resolution.
Important After you press {Apply} , the system displays a pop-up,
asking that you confirm or cancel the procedure.
Press the {Output V-Lock} button to toggle the Output V-Lock mode on or off.
This button only appears when the {Reference Input} button is set to External .
~
On — In this mode, the {SDI Output Timing} button appears, enabling
you to set offsets anywhere relative to the external video reference input,
with positive or negative values.
Important When {Output V-Lock} is
Frame Sync mode, and one frame of delay will be incurred
on all native inputs. In addition, on the Input Setup Menu ,
the {Sync Mode} button is grayed out. Refer to the "
Menu " section on page 187 for more information.
Close
Apply
On , all native inputs are forced to
Input
FSN Series • User's Guide