Barco FSN Series User Manual page 106

4. Installation
Card and I/O Installation
5.
Card Cage Rim
Figure 4-12. Ejectors engaged in card cage rim
6.
Figure 4-13. Final card insertion
106
Using the nylon guides in the chassis for alignment, carefully insert the card into
the chassis until both ejectors engage the rim of the card cage. Each ejector will
"automatically" angle towards the middle of the card.
Card
On each ejector, squeeze the two black handles together, then simultaneously
push both latches into the slot on the card's front plate — until the card is fully
seated in the FSN-1400 chassis.
Squeeze
together
Squeeze
together
Caution Always push both latches simultaneously. If you only use one
latch, you can damage the card.
Push,
latch and
release
Push,
latch and
release
FSN Series • User's Guide