Barco FSN Series User Manual page 161

bå~ÄäÉë=jÉåì=aÉëÅêáéíáçå
From the Memory Menu , press {Enables} to display the Enables Menu , as shown below
in the View Mode .
Figure 5-58. Enables Menu, View Mode (sample)
The Enables Menu provides a close-up view of the "selected" register only, and all of its
associated Enables. The menu can be accessed in all modes ( View , Store and Recall ),
but not all functions are available, depending on the selected mode.
Enables themselves are arrays of sub-functions within an individual module, which can be
toggled on or off as desired. For example:
•
•
The Enables Menu is divided into three sections:
•
FSN Series • User's Guide
If you store a register that includes the M/E 1 module, there are seven Enables
within that module that divide the M/E into its various functional components.
You can elect to leave all enables on (and thus store or recall the entire M/E), or
you can elect to turn specific Enables on or off (and thus store or recall only a
portion of the M/E). Refer to the "
complete explanation of each module's Enables.
Register Table — The top portion of the menu provides the same table as the
Memory Menu , but only the selected register is shown. All column headings are
identical, including the space above the three left-hand columns which is reserved
for the large STORE and RECALL
5. Menu Orientation
Enable Descriptions " section on page 163 for a
labels.
Memory Menu
161