Barco FSN Series User Manual page 162

5. Menu Orientation
Memory Menu
•
•
The following functions are also available:
•
•
•
•
162
Module Section — Below the table is a matrix of buttons, one for each module.
Lines are drawn to the corresponding cells in the table for reference. Please note:
~
For release 1.0, the M/E 2 , CUST , STILL and DVE buttons are
permanently grayed out.
~
In Store Mode , the M/E 1 , PGM , SYS and AUX buttons are always blue,
indicating their availability for storage or modification. When selected,
the button is bordered in bright yellow, and its corresponding Enables
appear in the Enables Section .
~
In Recall Mode , if a button is grayed out, that module was not stored in
the selected register. If a button is blue, it can be selected and modified
~
In View Mode , if a button is grayed out, that module was not stored in
the selected register. If a button is blue, it can be selected and viewed.
Enables Section — When a blue button is selected in the Module Section , the
bottom portion of the menu shows all available Enables for that module. The title
of this section (in the black bar) changes as different modules are selected.
Depending on the mode, the Enables can be viewed (only), or modified:
~
In View Mode , Enables can only be viewed.
~
In Store Mode , Enables can be modified. All Enables will be on by
default, when you enter the Store Mode .
~
In Recall Mode , Enables can be modified — but only those that were
originally "enabled" in the selected register.
When an Enable is modified, it can be toggled on or off as desired.
~
When toggled On , the Enable is included in the selected memory Store
or Recall operation.
~
When toggled Off , the Enable is excluded from the selected memory
Store or Recall operation.
~
When an Enable is grayed out, it was not included in a previous memory
Store operation.
Refer to the " Enable Descriptions
category of Enables.
Registers can be selected with the top knob, or by pressing the {Memory
Register} value button. Refer to the "
for details.
Press {Description} to display the keyboard, which enables you to enter a
register description (or name). Refer to the "
page 167 for details.
Press {Advanced} to display the Advanced Memory Menu , which allows you to
delete registers and lock registers. The menu is only available in View Mode .
Refer to the " Advanced Memory Functions
On the Enables Menu :
~
Press {All On} to toggle all Enables on during a Store or Recall
operation.
~
Press {All Off} to toggle all Enables off during a Store or Recall
operation.
" section on page 163 for explanations of each
Selecting Registers " section on page 166
Naming Registers
" section on page 168 for details.
FSN Series • User's Guide
" section on