Barco FSN Series User Manual page 273

Table of Contents

Advertisement

råÇÉêëí~åÇáåÖ=mêÉëë=~åÇ=eçäÇ
Several buttons on the control panel offer "press and hold" functionality. These functions
are essentially short-cuts around the menu. Please note the following important points:
Following are descriptions of each "press and hold" function:
MIX
WIPE
KEY
1
KEY
2
DSK
STORE
RECALL
ASSIGN
FSN Series • User's Guide
A "press and hold" function always takes you directly to the requested new menu,
regardless of your current location in the menu system.
If a pop-up is displayed, the selected "press and hold" function also takes you to
the requested new menu. Essentially, this is the same as pressing {No} or
{Close} in a pop-up, then navigating to the new menu.
All "press and hold" functions take effect after the selected control panel button is
held down for 1.5 seconds.
Press and hold any MIX button on the control panel to display the Transition
Menu .
Press and hold any WIPE button on the control panel to display the Wipe Menu .
In M/E 1 , first enable KEY 1 to "arm" the key, then press and hold KEY 1 to
display the Keyer Menu for M/E 1, Key 1. If the key is not armed, the system will
not jump to the Keyer Menu .
In M/E 1 , first enable KEY 2 first to "arm" the key, then press and hold KEY 2 to
display the Keyer Menu for M/E 1, Key 2. If the key is not armed, the system will
not jump to the Keyer Menu .
First enable DSK to "arm" the key, then press and hold DSK to display the Keyer
Menu for the DSK, and display the phantom key bus. If the key is not armed, the
system will not jump to the Keyer Menu , nor will the phantom key bus be
displayed.
Press and hold STORE to display the Memory Menu .
Press and hold RECALL to display the Memory Menu .
Press and hold the ASSIGN button to display the Clean Feed Setup Menu .
In the Custom Control section, press and hold FRZ , then press any source
button to freeze that source.
In the Custom Control section, press and hold UNFRZ , then press any source
button to un-freeze that source.
7. Operations
Understanding Press and Hold
273

Advertisement

Table of Contents
loading

Table of Contents