Table of Contents
Advertisement
5. Menu Orientation
System Menu
The following diagnostic functions are provided:
•
2
•
sáÉï=bêêçêë
From the Diagnostics Menu , press {View Errors} to display the View Errors Menu . The
menu can also be accessed by pressing {View Error Info} from within a pop-up error
View
message. The figure below illustrates a sample menu.
Errors
Figure 5-116. View Errors Menu (sample)
The View Errors Menu provides a comprehensive scrolling list of system errors along with
technical support details and troubleshooting help (if available). In the Error Table , four
columns of information are provided:
•
230
The system provides eight GPO ports. To test the ports, connect target devices to
the ports as required. Then, press any combination of buttons in the GPO section
of the Palette to toggle the state of the selected port. In Appendix A, refer to the
"
GPIO Connector
" section on page 319 for pinouts.
The system provides four GPI ports. To test the ports, connect outputs from your
target devices to the ports as required. Then, trigger the external devices locally
(at the device itself) and note the results in the table on the Palette . In
Appendix A, refer to the "
GPIO Connector
Priority — all errors are assigned priority numbers.
" section on page 319 for pinouts.
FSN Series • User's Guide
Advertisement
Table of Contents
