Barco FSN Series User Manual page 176

5. Menu Orientation
System Menu
•
•
In the Tool Bar , the following operations can be performed on the highlighted port:
•
Discover
FSN-
1400
Note
Please wait while the system discovers FSN-1400
units ...
Figure 5-70. Discover FSN-1400 pop-up
Select the FSN-1400 to which
Device
FSN-1400
FSN-1400
FSN-1400
Figure 5-71. FSN-1400 selection keypad (sample)
176
Subnet Mask — lists the subnet mask of the associated Ethernet port. This
address can be changed using the {Set Subnet Mask} button.
MAC — lists the MAC address of the associated Ethernet port.
If the Status column in the Ethernet Status Table reads " Not Connected " for any
reason, use the "discover" process to locate the IP address(es) of all FSN-1400
units within your local network. This action might be required, for example, if the
IP address of a particular unit was changed.
Press {Discover FSN-1400} to display the following pop-up:
Discover FSN-1400
During this interval, the system searches the network for FSN-1400 systems, and
the FSN-1400 Selection Keypad appears:
you want to connect
IP Address
192.168.0.5
192.168.0.8
192.168.0.21
In the Keypad , touch the desired FSN-1400 , and then press {Connect} .
Close
Close
Connect
FSN Series • User's Guide