Barco FSN Series User Manual page 261

p~îáåÖ=íÜÉ=pÉíìé
FSN Series system setup: Step 15
This procedure enables you to save all system setup parameters to non-volatile memory.
15
Use the following steps to save all system setup parameters:
1.
2.
3.
FSN Series • User's Guide
Prerequisite — Ensure that you are familiar with the Save All function. In
Chapter 5, refer to the "
In the Menu Bar , press {System} to access the System Menu .
Press {Save All} to display the confirmation pop-up.
Press {Close} to clear the pop-up.
Save All " section on page 220.
6. System Setup
Saving the Setup
261