Barco FSN Series User Manual page 224

5. Menu Orientation
System Menu
qJ_~êI=gçóëíáÅâ=~åÇ=håçÄë
From the Diagnostics Menu , press {T-Bar Joystick Knobs} to display the T-Bar,
T-Bar Joystick, Knobs Menu . The figure below illustrates a sample menu.
Joystick
Knobs
Figure 5-111. T-Bar, Joystick, Knobs Menu (sample)
The T-Bar, Joystick, Knobs Menu enables you to perform diagnostic tests on the T-Bar ,
Joystick and the four knobs. The two tables at the top provide Joystick and T-Bar data.
•
•
The following diagnostic functions are provided on the menu:
•
224
Joystick Table — data is listed for the X , Y and Z axes. As you move the
Joystick to its maximum limit along each axis, the proper range is -100% to
100% . If the Joystick does not reach these values, or does not display 0% when
fully at rest, use the {Re-center} button. See below for details.
T-Bar Table — data is listed for each bank's T-Bar . As you move each T-Bar to
its top and bottom limits, the proper range is 0 to 100 . If the T-Bar does not
display these values at each limit, use the {Set Top Limit} and {Set Bottom
Limit} buttons. See below for details.
Knobs — one data field is provided for each knob. As you rotate a knob, the
associated value should range between + 7 and -7 , as you rotate the knob
clockwise and counter-clockwise, respectively.
FSN Series • User's Guide