Touch Screen Menu Section; Source Selection Bus; Layer Control Section; Transition Section - Barco ScreenPRO-II User Manual

2. Hardware Orientation
pÅêÉÉåmolJff=cêçåí=m~åÉä
The figure below illustrates the ScreenPRO-II front panel:
1
Figure 2-1. ScreenPRO-II Front Panel
1) Chassis Handles
2)

Touch Screen Menu Section

3)

Source Selection Bus

Following are descriptions of each front panel control feature:
1)
2)
3)
4)
ScreenPRO-II • User's Guide
2
4)

Layer Control Section

5)

Transition Section

6)

Mixer Functions Section

Chassis Handles
Two Chassis Handles are provided for ease of installation and transportation.
Touch Screen Menu Section
The Touch Screen Menu Section is used for system configuration, setup and
operational adjustments, such as PIPs and keys. Refer to the "
Menu Section " heading on page 19 for details.
Source Selection Bus
The Source Selection Bus allows you to choose the sources that are routed into
PIPs and keys.
~
On the basic model, up to 8 analog sources can be routed.
~
On the HD model, up to 8 analog sources plus up to two HD-SDI/SD-SDI
sources can be routed.
Refer to the "
Source Selection Bus
Layer Control Section
The Layer Control Section is the operational heart of the ScreenPRO-II,
enabling you to assign sources to PIPs and keys on the mixer. Here, you control
the overall "look" on Preview and Program. Refer to the "
heading on page 21 for details.
3
7)
" section on page 20 for details.
ScreenPRO-II Front Panel
4 5
7 6
ScreenPRO-II Model
Touch Screen
Layer Control Section "
15