Clean Feed Setup Menu; Clean Feed Outputs; Assign Button - Barco FSN Series User Manual

5. Menu Orientation
System Menu
`äÉ~å=cÉÉÇ=pÉíìé=jÉåì
From the System Menu , press {Clean Feed Setup} to display the Clean Feed Setup
Menu , which enables you to set clean feed outputs and the source for the ASSIGN button
(in the control panel's Aux Section ).
The figure below illustrates a sample Clean Feed Setup Menu .
Figure 5-78. Clean Feed Setup Menu (sample)
The Clean Feed Setup Menu has two panels:
•
•
`äÉ~å=cÉÉÇ=lìíéìíë
Press {Clean Feed Outputs} to set up all physical clean feed outputs on the FSN-1400's
Clean
M/E Card. The graphic on the Palette is a "flow-chart." It illustrates the clean feed points
Feed
that can be mapped to the clean feed output connectors, with buttons provided for each
Outputs
selection point.
Three mutually exclusive clean feed points are provided for M/E 1's clean feed output:
•
•
•
184

Clean Feed Outputs

Assign Button

Press {M/E 1 Clean 1} to select the clean feed point prior to Keyer 1.
Press {M/E 1 Clean 2} to select the clean feed point prior to Keyer 2.
Press {M/E 1 Out} to select the M/E 1 program output.
FSN Series • User's Guide