Barco FSN Series User Manual page 293

píçêáåÖ=jÉãçêó=oÉÖáëíÉêë
When you store a memory register, you take a "snapshot" of the switcher and the selected
modules. Once stored, you can not add data to that register — you can only overwrite it
with new data.
Storing a memory register and bypassing the Enables is an easy equation. This method
stores the entire contents of the selected module(s).
•
Storing a memory register and setting Enables is also an easy equation. This method
stores partial contents of the selected module(s).
•
The following topics are discussed in this section:
•
•
•
•
píçêÉI=_óé~ëë=bå~ÄäÉëI=rëÉ=aÉÑ~ìäí=k~ãÉ
Use the following steps to store a memory register, bypass Enables, and use the
default register name:
1.
2.
3.
4.
5.
píçêÉI=_óé~ëë=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ
Use the following steps to store a memory register, bypass Enables, and enter a
custom register name:
1.
2.
3.
4.
5.
6.
FSN Series • User's Guide
If you store M/E 1 into register 100, you can not add AUX data into that
register. However, you could overwrite register 100 with new data.
STORE , [select modules] , [select register #] , ENTER
STORE , [select modules] , [select register #] , [set Enables] , ENTER
Store, Bypass Enables, Use Default Name
Store, Bypass Enables, Enter Custom Name
Store, Set Enables, Enter Custom Name
Memory Store Notes
Set up the switcher in the exact configuration that you want stored.
On the Keypad , press STORE .
Select the desired modules to include in the register.
Enter the desired register number.
Press ENTER . The register is now stored in memory, all Enables are on, and a
default number has been assigned ( reg-# ). Above the Keypad , the selected
register number and the default label " reg-# " appear in the Memory Display ,
adjacent to the prefix " STR: "
Set up the switcher in the exact configuration that you want stored.
On the Keypad , press STORE .
Select the desired modules to include in the register.
Enter the desired register number.
Navigate to the Memory Menu . The selected register will be highlighted in the
table, and the " STORE " banner will be lit red.
Press {Description} to display the Pop-up Keyboard .
7. Operations
Working with Memory Registers
293