Barco FSN Series User Manual page 225

•
Joystick
On
•
Re-
center
•
T-Bar
M/E
On
•
Set Top
Limit
•
Set
Bottom
Limit
`~äáÄê~íÉ=qçìÅÜ=pÅêÉÉå
From the Diagnostics Menu , press {Calibrate Touch Screen} to run the Touch Screen's
Calibrate interactive calibration routine. A special calibration screen appears, on which you will be
Touch
asked to touch certain areas, and then accept the new calibration. After you accept the
Screen
calibration, the system will return to the FSN Series menus.
FSN Series • User's Guide
Press {Joystick} to toggle the Joystick on and off. When you toggle the
Joystick off, a pop-up asks you to confirm the procedure. When off, the Joystick
no longer functions, and the {Re-center} button is grayed out.
Note It is recommended that you leave the Joystick on.
Ensure that the Joystick is fully at rest, then press {Re-center} to re-center the X ,
Y and Z axes. Use this function only if the Joystick does not display 0% on all
axes when fully at rest.
Press {T-Bar M/E} to toggle the M/E's T-Bar on and off. When you toggle it off, a
pop-up asks you to confirm the procedure. When off, the T-Bar no longer
functions on the control panel, and the {Set Top Limit} and {Set Bottom Limit}
buttons are grayed out.
Note It is recommended that you leave the T-Bar on.
Note The {T-Bar PGM} button performs the identical function for
the PGM bank's T-Bar .
A {Set Top Limit} button is provided for each T-Bar on the switcher. Move the
selected T-Bar to its top limit, then press {Set Top Limit} to calibrate the T-Bar's
top position. In the pop-up, press {Calibrate} .
A {Set Bottom Limit} button is provided for each T-Bar on the switcher. Move
the selected T-Bar to its bottom limit, then press {Set Bottom Limit} to calibrate
the T-Bar's bottom position. In the pop-up, press {Calibrate} .
Tip For a more accurate calibration, use a pencil eraser instead
of your finger tip.
Important As an alternate method, if required, you can start the Touch
Screen calibration procedure by simultaneously pressing the
FINE ADJUST and ENTER buttons on the Keypad .
5. Menu Orientation
System Menu
225