Barco FSN Series User Manual page 167

k~ãáåÖ=oÉÖáëíÉêë
The "name register" feature is available in the following memory modes only:
•
Descrip-
tion
•
By default, new registers are named Register_[n] , where [n] is the number of the selected
register. As desired, you can enter a custom description of a register.
To use the feature:
•
•
Refer to the "
about the Keyboard .
FSN Series • User's Guide
View Mode
Store Mode
Access the Pop-up Keyboard :
~
From the Memory Menu , highlight the desired register in the table, and
then press {Description} .
~
From the Enables Menu , press {Description} .
Enter a brief description, then press {Enter} to close the Keyboard .
Note In View Mode , the new (or edited) description appears
immediately in the register table. In Store Mode , the new (or
edited) description will not appear in the table until the
ENTER button is pressed on the Keypad .
Using the Pop-up Keyboard
5. Menu Orientation
" section on page 133 for more information
Memory Menu
167