Barco FSN Series User Manual page 212

5. Menu Orientation
System Menu
•
Map
Source /
Cut
•
Map
Linear
Key Fill
•
Un-map
Source /
Cut
•
Un-map
Linear
Key Fill
j~é=_ìííçåë=hÉóé~Ç
The figure below illustrates the Map Buttons Keypad with the {Sources} button selected.
Select the source to map to
CAM3
CAM4
CHY1
CHY2
CHY3
CHY4
DO-1
DO-2
Figure 5-101. Map Buttons Keypad (sample)
The keypad appears when either the {Map Source/Cut} button or the {Map Linear Key
212
~
When {SHIFT} is on, you can map buttons 11 - 20 , and the labels in the
Button column read 11 - 20 .
Press {Map Source/Cut} to map an input (source) or a linear key "cut" signal to
the selected panel button. On the highlighted row in the table, the cell under the
Source/Cut column highlights in blue, and the Map Buttons Keypad appears.
Refer to the " Map Buttons Keypad
Press {Map Linear Key Fill} to map a linear key "fill" signal to a panel button. On
the highlighted table row, the cell under the Linear Key Fill column highlights in
blue, and the Map Buttons Keypad appears. Refer to the "
Keypad " and " Mapping Luma Keys and Linear Keys
On the highlighted row, press {Un-map Source/Cut} to un-map the source in the
Source/Cut column. Once pressed, the source is removed from the panel.
On the highlighted row, press {Un-map Linear Key Fill} to un-map the source in
the Linear Key Fill column. Once pressed, the source is removed from the panel.
button 8
Sources
Patterns
" section below for details.
Close
Test
Color
BG
Map
Map Buttons
" sections for details.
FSN Series • User's Guide