Barco FSN Series User Manual page 206

5. Menu Orientation
System Menu
•
Clear
Mask
•
Reset
All
The four Mask value buttons are always active in this panel. Use these four buttons to
Mask mask one or more edges of the video signal, if required. When a mask is applied on a
Top
selected edge, black is revealed in each masked section.
0
•
•
•
•
Once the image is masked as desired, use the {Fill H} , {Fill V} or {Fill H/V} functions to
scale the image to full screen.
`çäçê=`çêêÉÅíáçå=m~åÉä
On the Input Setup Menu for universal inputs, press {Color Correction} to display the
Color Correction Panel . All functions except for the Gamma function are identical to
Color
those for native inputs. Refer to the "
Correction
details.
•
Brightness
Contrast
Gamma
206
Press {Clear Mask} to return all mask settings to 0 (zero). The image's current
scaling is maintained.
Press {Reset All} to return the input to its previous scaling, and return all mask
settings to 0 (zero).
Use the {Mask Top} button or knob to mask the top edge.
Use the {Mask Bottom} button or knob to mask the bottom edge.
Range : 0 to the image's maximum number of vertical lines
Default : 0
Use the {Mask Left} button or knob to mask the left edge.
Use the {Mask Right} button or knob to mask the right edge.
Range : 0 to the image's maximum number of horizontal pixels
Default : 0
Note For each mask function, the range shown in the Keypad 's top
Function Bar is dynamic. For example, if you press {Mask
Left} and mask 100 pixels from the image's left edge, when
you press {Mask Right} , the maximum range is now 100
pixels less.
Press {Brightness Contrast Gamma} to adjust the input's overall brightness,
contrast and gamma. Three value buttons appear:
~
Use the {Brightness} button (or knob) to set brightness.
Range : 50% to 150%
Default : 100%
~
Use the {Contrast} button (or knob) to set contrast.
Range : 50% to 150%
Default : 100%
~
Use the {Gamma} button (or knob) to set gamma.
Range : 0.5 to 3.0 (in increments of .01)
Default : 1.0
Color Correction Section
FSN Series • User's Guide
" heading on page 195 for