Barco FSN Series User Manual page 222

5. Menu Orientation
System Menu
pçÑíï~êÉ=q~ÄäÉ
The figure below illustrates a sample Software Table .
Device
FSN-1400
FSN-150
Figure 5-109. Software table (sample)
The Software Table lists the current versions of software in the FSN-1400 and control
panel. The following columns of information are provided:
•
•
•
pçÑíï~êÉ=cìåÅíáçåë
The following software functions are provided:
•
Update
Software
•
Update
FSN-1400
The following two buttons are conditional. They only appear if a software mis-match occurs
in either the Touch Screen or the control panel's flash memory. If there is no mis-match, the
buttons do not appear.
•
Update
Touch
Screen
•
Update
FSN-150
Flash
222
System Status
Status
Connected 1.0
Connected 1.0
Device — lists the system devices.
Status — provides status for the device (e.g., Connected , Not Connected ,
Software Mis-match ).
SW Version — lists the device's software version.
Note When the message " Software Mismatch " appears on the
FSN-1400 line, you must update the FSN-1400 software.
Press {Update Software} to install the latest version of FSN Series software in
the control panel. In Chapter 8, refer to the "
section on page 305 for complete instructions.
Press {Update FSN-1400} to match FSN-1400 software to the control panel
software. In Chapter 8, refer to the "
page 306 for complete instructions.
Press {Update Touch Screen} to update the software in the Touch Screen , if
required. The button will only appear if a software mis-match occurs. In
Chapter 8, refer to the " Updating FSN-1400 Software
complete instructions.
Press {Update FSN-150 Flash} to update the control panel's flash memory, if
required. The button will only appear if a software mis-match occurs. In
Chapter 8, refer to the " Updating FSN-1400 Software
complete instructions.
SW Version
Updating Control Panel Software
Updating FSN-1400 Software
" section on page 306 for
" section on page 306 for
FSN Series • User's Guide
"
" section on