Barco FSN Series User Manual page 190

5. Menu Orientation
System Menu
fåéìí=q~ÄäÉ=aÉëÅêáéíáçå
The figure below illustrates a sample Input Table on the Input Menu :
Slot
1 1
1 2
1 3
1 4
1 5
1 6
Figure 5-83. Input Table (sample)
The Input Table provides information about each input, and the yellow highlight
automatically tracks the selected input connector in the Rear I/O View .
The following columns of information are provided:
•
•
•
•
•
190
In Map Name
1 CAM1 Native
2 CAM2 Native
3 CAM3 Native
Slot — indicates the selected input card slot ( 1 through 7 ).
In — indicates the selected input ( 1 through 8 for a NIC , 1 or 2 for a UIC ).
Map — indicates the control panel button to which the input is mapped, as defined
with the {Map to} button. Unshifted locations are 1 through 10 . Shifted locations
are 11 through 20 .
~
If the cell is blank, the input is not mapped to the panel.
~
If the input is mapped to more than one button, the last button mapped
by the user is listed.
Name — indicates the input's name, as defined with the {Input Name} button.
Format — displays the following information:
~
When the associated connector is green, the format is shown:
• For a NIC , " Native " is shown.
• For a UIC , the input's resolution is shown (e.g., 1920 x 1080i @
59.94 ).
~
When the associated connector is red, the label "
~
When the associated connector is yellow, the cell is blank.
~
When the associated connector is white, the cell is blank.
Format
FSN Series • User's Guide
Error " is shown.