Application Questions - Barco FSN Series User Manual

NK==fåíêçÇìÅíáçå

Application Questions

póëíÉã=O=Ô=jìäíáéäÉ=aÉëíáå~íáçåë
The figure below illustrates a sample system in which individual Aux outputs are routed to
different destinations.
PC
Cameras
Analog / Digital
VTR / DVR
Server
Figure 1-4. Block diagram, multiple destination FSN Series system (sample)
This configuration is ideal for a setup consisting of three projected images behind a
podium. The left and right images are identical (as switched on M/E 1), and the center
image can be identical, or different from the two "wing" projectors (as switched on the PGM
bank). By connecting Aux outputs to different projectors, the TD has complete creative
control over the look, with the ability to display different setups on the projectors.
In the diagram:
•
•
•
•
^ééäáÅ~íáçå=nìÉëíáçåë
At Barco, we take pride in offering unique solutions to demanding technical problems. If
you have application questions, require further information or would like to discuss your
application requirements in more detail, please call (866) 469-8036. Our Customer
Support Engineers will be happy to supply you with the support you need. Refer to
Appendix B,
26
FSN-150
Ethernet
FSN-1400
Multiple scaled and un-scaled sources connect to the FSN-1400, including
cameras, PCs, VTRs, DVRs and servers.
The FSN-1400 and FSN-150 connect via Ethernet.
Aux outputs 1, 2 and 3 connect to the three projectors.
Aux outputs 4, 5 and 6 are connected to peripheral devices, such as monitors and
VTRs. In practice, this enables the TD to provide completely independent stage
or green room monitors, plus the ability to record the output of the entire event.
"Contact Information" on page 325 for details.
Left
Screen
Aux 1
M/E 1
Program Preview
Aux 4 Aux 5
Green Room Production
FSN Series • User's Guide
Center Right
Screen Screen
Aux 2 Aux 3
PGM M/E 1
Aux 6
ISO Camera Record