Barco FSN Series User Manual page 92

4. Installation
Safety Precautions
p~ÑÉíó=mêÉÅ~ìíáçåë=
For all FSN Series installation procedures, observe the following important safety and
handling rules to avoid damage to yourself and the equipment:
•
•
pÜáééáåÖ=fåÑçêã~íáçå
All FSN Series systems are shipped in separate boxes as follows:
•
•
•
•
•
råé~ÅâáåÖ=~åÇ=fåëéÉÅíáçå=
Inspect the shipping boxes for damage. If you find any damage, notify the shipping carrier
immediately for all claims adjustments. As you open each box, compare its contents
against the packing slips. If you find any shortages, contact your Barco sales
representative.
Once you have removed all the components from their packaging and checked that all the
listed components are present, inspect each unit to ensure there was no damage during
shipping. If there is damage, notify the shipping carrier immediately for all claims
adjustments.
92
To protect users from electric shock, ensure that the power supplies for each unit
connect to earth via the ground wire provided in the AC power cord.
AC Socket-outlets should be installed near the equipment and be easily
accessible.
Box 1
~
Control panel
~
Script Lights
Box 2
~
Touch Screen
~
Touch Screen Stand
Box 3
~
FSN-1400 chassis
~
1 x M/E card
~
1 x System card
~
1 x NIC (installed in slot 1)
~
1 x UIC (installed in slot 7)
~
Blank panels
~
1 x power supply
If additional UICs and NICs are ordered, each is shipped in its own box, along with
its associated rear I/O panel.
If a redundant power supply is ordered, it is shipped in its own box.
FSN Series • User's Guide