Barco FSN Series User Manual page 96

4. Installation
Touch Screen Installation
3.
Connector Panel
USB DVI-D
Figure 4-3. Touch Screen Connectors
4.
5.
96
Place the Touch Screen face down on a table (careful of the knobs), and connect
the USB, DVI-D and 12V DC cables to their respective connectors on the Touch
Screen's connector panel.
12V DC
Lift the Touch Screen, then carefully slide the top stem of the desk stand through
the slot in the VESA mounting plate. Adjust the height of the monitor as required,
then secure the mounting plate to the stand using the lock knob.
Secure the cable harness to the stand using the cable mounts in the desk stand.
®
Use Velcro or nylon cables ties as required.
Note A Kensington
Screen's rear panel. This slot can be used to attach an anti-
theft system, such as a lock-and-cable apparatus. Visit your
local computer retailer for details.
Cable Harness
®
Security Slot is provided on the Touch
FSN Series • User's Guide
To Control Panel