Barco FSN Series User Manual page 264

7. Operations
Quick Setup and Operations
nìáÅâ=pÉíìé=~åÇ=léÉê~íáçåë
For the optimum speed in setting up and operating your FSN Series switcher, use the
following steps. For reference, links are provided to the appropriate sections in this guide.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Set up native inputs — As required, set up all native inputs, and perform the
11. Set up universal inputs — As required, set up all universal inputs, and perform
12. Set up external DSK inputs — As required, set up the external DSK inputs, and
13. Complete button mapping — Complete the button mapping on the control
14. Complete tally connections — Complete all system tally relay connections.
15. Set up user preferences — Complete all user preference choices, as required.
264
Note Many of these steps were already covered in Chapter 4 and
Chapter 6. As required, use the following list as an easy
check-list for all quick setup requirements.
Connect power — Ensure that power is properly connected to all FSN Series
components.
~
Chapter 4, " Control Panel Installation
~
Chapter 4, " Touch Screen Installation
~
Chapter 4, " FSN-1400 System Connections
Connect inputs — Connect all input sources to the FSN Series. (Chapter 4,
" Signal Connections ," page 108.)
Connect outputs — Connect the output(s) of the FSN Series to your target
devices. (Chapter 4, " Signal Connections
Turn on power — Turn on power to all FSN Series components, and to all
peripheral equipment. (Chapter 6, "
Factory reset — If you are using the FSN Series for the first time, or if you are
using a system that has just returned from another event, perform a full factory
reset. (Chapter 6, " Return to Factory Default
Set reference video — Set the desired reference video mode. (Chapter 6,
" Reference Video and Output Setup
Set output format — Set the desired output resolution and frame rate.
(Chapter 6, " Reference Video and Output Setup
Set clean feeds — Set the desired clean feed output points. (Chapter 6, "
Feed Setup ," page 251.)
Enable test patterns — If required, use test patterns to verify outputs and make
the necessary adjustments. When complete, turn off the test patterns.
(Chapter 6, " Output Test Patterns
necessary adjustments. (Chapter 6, "
the necessary adjustments. (Chapter 6, "
perform the necessary adjustments. (Chapter 6, "
page 257.)
panel, including all inputs, color background signals and test patterns. (Chapter 6,
" Button Mapping ," page 259.)
(Chapter 6, " Tally Setup ," page 259.)
(Chapter 6, " User Preference Setup
," page 94
," page 95
," page 100
," page 108.)
Power Up and Status Check
," page 245.)
," page 248.)
," page 248.)
," page 250.)
Native Input Setup ," page 252.)
Universal Input Setup
External DSK Input Setup
," page 260.)
FSN Series • User's Guide
," page 244.)
Clean
," page 254.)
,"