Barco FSN Series User Manual page 62

3. Control Panel Orientation
Control Panel Descriptions
aáëéä~ó=pÉÅíáçå
The figure below illustrates the Display Section:
1
Figure 3-3. Display Section (with sample menu)
1)
The Display Section provides the controls for adjusting system parameters, and the
display itself can be mounted in a variety of ways. In Chapter 4, refer to the
Mount Options" section on page 97 for details.
Following are descriptions of each section:
1)
2)
62
Touch Screen
Touch Screen
The high-resolution Touch Screen is a multi-menu user interface that enables
you to set up the switcher, adjust parameters, view status, and manage all
functions. Refer to Chapter 5,
Knobs
Four Knobs are provided to the right of the Touch Screen. When one or more
"value buttons" appear on the Touch Screen, or when a line is drawn to a table,
the adjacent knob(s) enable you to adjust those specific parameters.
Please note:
~
Turning a knob to the right (clockwise) increases a parameter's value, or
scrolls the highlight in a table down. Turning a knob to the left (counter-
clockwise) decreases a value, or scrolls the highlight in a table up.
~
If you adjust a numeric value using a Knob, you do not need to press
Enter. Using this method, the new value is immediately active.
~
If you enter a numeric value using the on-screen Keypad or the control
panel's Keypad, the Enter button must be pressed.
2) Knobs
"Menu Orientation" on page 117 for details.
FSN Series • User's Guide
2
"Display