Barco FSN Series User Manual page 246

6. System Setup
Touch Screen Calibration
qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå
FSN Series system setup: Step 3 .
The calibration procedure is an excellent starting point prior to performing a comprehensive
3
system setup.
Use the following steps to calibrate your Touch Screen:
1.
2.
3.
oÉëíçêáåÖ=íÜÉ=póëíÉã
FSN Series system setup: Step 4 (optional)
In this procedure, you will restore your system configuration from a USB drive — provided
4
that you previously backed up your system to a USB drive.
Use the following steps to restore your system from the USB Drive:
1.
2.
3.
4.
At the conclusion of this procedure, your system is completely set up — exactly the way
that you left it when you performed a complete system "backup." No further setup
operations are required.
Please continue with system operations. Refer to Chapter 7, "
for details.
246
Prerequisite — Ensure that you are familiar with the Diagnostics Menu . In
Chapter 5, refer to the "
In the Menu Bar , press {System} to access the System Menu .
Press {Diags} to display the Diagnostics Menu .
Press {Calibrate Touch Screen} , then follow the prompts on screen to perform
the calibration.
Tip For a more accurate calibration, use a pencil eraser instead
of your finger tip.
Prerequisite — Ensure that you are familiar with the Backup and Restore
Menu . In Chapter 5, refer to the "
page 234.
Ensure that your USB drive is properly inserted in the control panel's USB Port .
In the Menu Bar , press {System} to access the System Menu .
Press {Backup Restore} to display the Backup and Restore Menu .
Press {Restore System} to initiate the system restore procedure. Once the
restore process is complete, you will be prompted to press {Restart} , which
restarts the FSN-1400 and the control panel.
Diagnostics Menu " section on page 223.
Backup and Restore Menu
Operations
FSN Series • User's Guide
" section on
" on page 263